This bare hull is a 54` wesmac that would be finished to a commercial fishing vessel

 

 

This is a view of the floor flange where the floor beams will be attached  notice the step down from  the pilot house to the working platform.

 

Galley floor beams spruce 2x10`s fiberglassed over and glassed to the hull to accomodate 5 men .  very rugged !   notice the 55 gal fresh water tank under the floor lots of room

 

Platform floor beams 3.5'' x 3.5''  hollow fiberglass very strong and will never rot these are in the fish hold so we filled them with poura foam to fill the hollow beams inside to eliminate fish guts  and stale water from stinking up the fish hold.Notice the 8'' vernay tube we used running for and aft thru the fish hold used for floor support and to run steering hydroulic lines ,electrical wire and fuel lines thru.

 

A double v-berth forward will sleep 4 of the 5 crew men there will also be a 3 burner stove w /oven   shower with head  full galley This is all built of 1/2 '' devinecell core there is no wood except the floor beams up forward nothing will rot ever

 

This would be the engine compartment sprayed white with gelcoat

Almost ready to move to the launch finishing touches

46` wesmac

 

This is a 46' wesmac  we finished for a local lobster fisherman notice hauling station & banding tray